every thing about liquefaction and CPT
LiquefactionSPT is a multi-purpose liquefaction analysis software with dual units based on 2008 Idriss & Boulanger Method. You may compute factor of safety against liquefaction, dry seismic and wet seismic settlements as well as lateral…
LIQUITER determines by the Seed and Idriss (1982) method the safety factor against liquefaction of saturated non-cohesive strata subjected to earthquake loading.
LISA (Level I Stability Analysis) uses Monte Carlo simulation of the infinite slope equation to estimate a probability of slope failure for use in relative stability assessment of natural slopes.
LLP99 carries out the analysis of a laterally loaded pile modelled as a beam on elasto-plastic springs.
LoadCap carries out the calculation of bearing capacity, failure loads and settlement of foundations on soils according to the methods of Hansen, Terzaghi, Meyerof, and Vesic and of …
LPILE Plus is a program for the analysis of piles and drilled shafts under lateral loads. The program computes deflection, shear, bending moment, and soil response with respect to depth in non-linear soils.
LPRES calculates the lateral pressure from all types of surcharge loads on a retaining system.
LTBASE is used for the analysis of laterally loaded piles constructed on slopes. It incorporates a procedure for including the contribution of base resistance in the case of large diameter piles.
LUSAS is a program for finite element analysis in structural and civil engineering, but with capabilities for soil and groundwater modelling.
