GGU-SIEVE for the evaluation and presentation of grain size distributions obtained by wet analysis, sieve analysis, combined wet and sieve analysis, with output as a form or as a diagram.
GGU-SLAB can design foundation slabs using the subgrade or constrained modulus procedures. To solve the differential equations the finite-element method, with triangular elements, is used.
GGU-SLICE calculates the stability of slope laminae. Colour output and bitmap graphics are supported.
GGU-STABILITY for slope failure calculations and soil nailing. Considers circular slip surfaces (Bishop or Krey) and polygonal slip surfaces (Janbu),…
GGU-TIMESET for the evaluation and presentation of time-settlement tests. A miniCAD system is available for additional labelling of graphics. Results output in a form or as a diagram to screen, or to a printer or plotter.
GGU-TRENCH allows the calculation and presentation of inner and outer wall stability of slurry supported retaining wall excavations.
GGU-TRIAXIAL is for the evaluation and graphical presentation of triaxial shear tests. The following tests can be evaluated: D-test, CU-test, CCV-test and UU-test. The test data can be entered by hand or imported as an ASCII file.
GGU-UNDERPIN allows the design of foundation underpinning. Screen input and graphical output. The basis is the “Recommendations of the Working Group for Excavations” (“Empfehlungen des Arbeitskreises Baugruben”) (EAB).
GGU-UNIAXIAL allows the evaluation and graphical presentation of direct shear tests. After input of the initial volume and height, and the test results (time, force, compression), a diagram is presented.
GGU-UPLIFT calculates hydrostatic uplift and hydraulic base failure stability in one-dimensional systems. Colour output and bitmap graphics are supported.
