WinSEISAB
- WinSEISAB analyzes the soil structure interaction for bridge structures to determine the seismic demand placed on various bridge components. |
VERSAT-D2D
- VERSAT-D2D is a finite element program for 2D plane strain dynamic stress and deformation analyses of earth structures subjected to base excitation or to dynamic loads at specified locations. |
TOWER
- Earthquake Analysis and Response of Intake-Outlet Towers. TOWER consists of a series of three programs for the earthquake response analysis of intake-outlet towers. |
TNMN
- TNMN is an auxiliary program for seismic analyses of slopes or retaining walls which computes the displacement of a potential sliding mass by ... |
TELDYN
- TELDYN is a general purpose dynamic finite element program for the analysis of soil response and seismic soil-structure interaction problems. |
SPASM
- SPASM performs a dynamic analysis for lateral soil-pile behavior implemented in a beam-column. The analytical method enables the study of the lateral response of soil-pile systems under earthquake ground motion. |
SEPAP
- Seismic Elasto-Plastic Analysis of Piles (SEPAP) calculates the elasto-plastic response of a single pile subjected to earthquakes. |
SASSI2000
- SASSI2000 is a package of interrelated computer programs that can be used to solve a range of dynamic soil-structure interaction problems in 2 or 3 dimensions. |
QUAD4M
- QUAD4M is a 2D time domain solution to dynamic soil response incorporating independent damping in each element in the continuum and a transmitting base so that the half-space beneath a mesh can be modeled,... |
NEABS
- Nonlinear Earthquake Analysis of Bridge Systems. NEABS performs nonlinear dynamic analysis of long, multiple span bridge systems by a lumped mass mathematical idealisation using a combination of the following 3D linear and... |
MTR/SASSI
- MTR/SASSI consists of a set of interrelated computer programs, which can be used to solve a range of dynamic soil-structure interaction (SSI) problems in two and three dimensions. |
MICROSARB
- Seismic Analysis of Regular Highway Bridges. MICROSARB implements procedure 1 of the Applied Technology Council (ATC-6) seismic design guidelines for straight regular highway bridges with Single Mode Spectral Analysis Method... |
LUSH2
- LUSH2 is a program for Complex Response Analysis of Soil-Structures Systems by the Finite Element Method. The program finds the complete response of a plane finite element model representing a soil-structure system. |
ISADAB
- ISADAB (Inelastic Static and Dynamic Analysis of Bridges) was developed for the transverse inelastic analysis of reinforced concrete highway bridges. |
HorRock
- HorRock carries out coupled horizontal-rocking foundation vibration analyses. |
FLUSH
- Seismic Soil-Structure Interaction Analysis. FLUSH is a development of the complex response finite element program LUSH for seismic soil-structure interaction analysis. |
ERST
- ERST evaluates the elasto-hydrodynamic response of submerged oil storage tanks to earthquake ground motion. A hybrid finite element method is used, in which the tank structure, the interior fluids,... |
EAGD-SLIDE
- Earthquake Analysis of Concrete Gravity Dams Including Base Sliding. EAGD-SLIDE evaluates the earthquake response of concrete gravity dams, including sliding at the interface between the base of the dam and the foundation rock surface. |
EAGD-84
- EAGD-84 (Earthquake Analysis of Concrete Gravity Dams). Evaluates the response of concrete gravity dams to earthquakes, including the effects of dam-water-foundation rock interaction and of materials... |
EACD-3D-96
- Three-Dimensional Earthquake Analysis of Concrete Dams. |
DYNSR
- DYNSR is used for the semi-analytic dynamic analysis for buried pipe structures. |
DynaPile
- DynaPile computes the dynamic stiffness of single piles or pile groups. The piles can be either floating piles or end-bearing piles. |
DynaN
- DynaN carries out the dynamic analysis of shallow and deep foundations based on the improved Novak's method where a non-reflective boundary is formed between the near field and the far field to account for the mass of soil in the boundary. |
DynaMat
- DynaMat uses a three dimensional hybrid method to estimate the equivalent dynamic stiffness and damping of machine foundations. |
DYNA5
- DYNA4 carries out dynamic analysis of rigid, flexible and pile foundation under harmonic, transient and random loading. |
BASSIN
- Dynamic Analysis of Bridge/Abutment/Backfill Systems Subjected to Traveling Seismic Waves. BASSIN computes the 3D dynamic response of an arbitrarily configured, elastic, bridge/abutment/backfill system. |
ADAP-88
- Nonlinear Earthquake Analysis of Concrete Arch Dams. ADAP-88 is a finite element analysis program for computing the earthquake response of arch dams including the nonlinear effect of contraction joint opening. |
6DOFS
- 6DOFS computes the steady state response of vibrating equipment on pad or piled foundations. The model assumes that the equipment and the foundations behave as a rigid body. |
