HeliCAP calculates the bearing and/or uplift capacity of AB Chance screw anchor/foundations. The software can be used in the analysis of applications such as remedial underpinning of existing structures,…
IMPRO 2 is a program for signal analysis for pile integrity control by the impedance and reflection methods (echo). Measuring the length, the stiffness, and the characteristic impedance of a pile.
INSTPILE calculates the maximum charateristic and design bearing capacity of a pile due to stresses during installation using the rules from European Standard prEN 288-005.
OPILE is a program to analyse single piles that are subjected to axial, lateral and torsional loads, displacements and rotations. It suits the particular requirements of the offshore geotechnical engineering community.
PDPWAVE is a pile drive-ability prediction program for impact hammers. Main features: One dimensional wave equation program. Hammer library for impact hammers (diesel, hydraulic, steam).
PIES computes the axial movement and load distribution within a single pile, or a pile within a group, subjected to axial load and/or externally imposed soil movements (heave or consolidation),…
PILE is part of the Oasys Geo suite, but available separately. Calculation of pile, shaft and base capacities and design loads for any given pile dimensions and soil parameters.
PILEWAVE demonstrates stress wave propagation in defective piles.
PILSET is part of the Oasys Geo suite, but available separately. Calculation of the settlement of a single pile using the integral method described by Poulos and Mattes.
PIT-W is software for reprocessing and interpreting low strain data obtained with the Pile Integrity Tester (PIT). The Standard Version is supplied with the PIT hardware.